Metalworking Shop from Scrap. The Whole Series. Vol. 1-7 Plus Extras...

[a3990918]

Metalworking Shop from Scrap. The Whole Series. Vol. 1-7 Plus Extras...
Big Collection of Gingery Workshop Books

Below are links to my collection of books from the David and/or Vincent Gingery workshop series. At the end is a list of Gingery books that I am seeking for my collection. Any help in locating them would be "GREATLY" appreciated. Thanks.

Examine these world famous (literally!) publications from Vince and Dave Gingery. Every book is loaded with detailed how-to, wall-to-wall illustrations, and practical knowledge


Password for all files: a3990918



Metalworking Shop from Scrap:

Gingery 1 The Charcoal Foundry
http://rapidshare.com/files/290902518/Char.Foun.rar
26.9mb

Gingery 2 The Metal Lathe
http://rapidshare.com/files/290481826/lathe.rar
6.19mb

Gingery 3 The Metal Shaper
http://rapidshare.com/files/290481824/Shaper.rar
5.81mb

Gingery 4 The Mill
http://rapidshare.com/files/290913954/The_Milling_Machine.rar
62.3mb

Gingery 5 The Drill Press
http://rapidshare.com/files/290902517/The_Drill_Press.rar
22.8mb

Gingery 6 The Dividing Head
http://rapidshare.com/files/290487117/_Dividing_Head.rar
8.04mb

Gingery 7 The Sheet Metal Brake
http://rapidshare.com/files/290487118/Sheet_Metal_Brake.rar
5.56mb

Gingery Coil Winding Machine
http://rapidshare.com/files/290913953/Coil_winding_machine.rar
6.13mb

Plastic Forming:
Gingery Plastic Injection Molding Machine
http://rapidshare.com/files/290922554/_Plastic_Injection_Molding_Machine.rar

Gingery Plastic Vacuum Forming Machine
http://rapidshare.com/files/290922555/_Plastic_Vacuum_Forming_Machine.rar

Metal Casting:
D. Gingery Building a Gas Fired Crucible Furnace
http://rapidshare.com/files/290922551/Building_a_Gas_Fired_Crucible_Furnace.rar

Gingery Making Crucibles
http://rapidshare.com/files/290922552/Making_Crucibles.rar

Non - Gingery Books:
Improved Shop Furnace: Improved version of Gingery's Lil Bertha Elec. Furn
http://rapidshare.com/files/102371234/Elect.rar

An Iron melting Cupala Furnace
http://rapidshare.com/files/102371235/_Cupala.rar

Gas Burners for Forges, Furnaces & Kilns: The Bible of Burners
by Michael Porter
http://rapidshare.com/files/103713858/1879535203.rar


Books I am Looking For:

Looking for the following David Gingery books:


Note that the titles in red represent books that I have acquired since the original posting of this thread. I will be posting these books in the future.


Lil Bertha-Electric Furnace for melting metal
Slip Roll Machine
Design & Build Centrifical Fans
Working Sheetmetal
Sheetmetal Technology
Build a 2-Cyl. Stirling Cycle Engine
Build a 35' Free Standing Tilt-Over Antenna Tower
Gingery's Magneto Magnatizer


Also the following books by Vince Gingery:

Unka Dave Gingery's Shop Notebook
Horz/Vert. Metal Cutting Bandsaw
Power Hacksaw with Vise
Secrets of Building an Alcohol Producing Still
Pipe Bending Machine
Plastic Injection Molding: An Attachment for the Drill Press
Gingery's Atkinson Differential Engine
Gingery's Tesla Turbine
How I Pour Babbitt bearings

and finally this book published by Gingery Publishing:

Building an Atmospheric Forge & Heat Treat Oven


http://i48.photobucket.com/albums/f225/8889653/Posting%20Aids/Enjoy.gif




.

[keithwdaniels]

When I try to download the Charcoal Foundry file I get this message:

Due to a violation of our terms of use, the file has been removed from the server.

Whats Up? I really wanted to make a charcoal foundry.... :-)

[anasdimi]

The files for the Plastics do not exist.Anyway,It was a nice post

[cpucpu]

1. Secrets of Building a Plastic Vacuum Forming Machine

2. How to Build a Pipe Bender (http://www.lindsaybks.com/dgjp/djgbk/pipe/index.html)

3. Plastic Injection Molding Machine

4. Build a Coil Winding Machine.

5. Gingery - Building_The_TESLA_Turbine.


Who says me? If so, reupload this thread files :)

[ajv1963]

Great Post, THANKS. The Plastic Inj and Metal Casting links are'nt working. Cud you please repost them?

[a3990918]

When I try to download the Charcoal Foundry file I get this message:

Due to a violation of our terms of use, the file has been removed from the server.

Whats Up? I really wanted to make a charcoal foundry.... :-)


Give it as try now...Seems to be working...:):P

[Cuda 340]

Super post. Thank you

[anakuper]

All link dead now, seem like there is reporter for gingery books...

[albertvanhulzen]

I tried to download Gingery 2 and got this message: "Due to a violation of our terms of use, the file has been removed from the server. "

Can the links be restored?

[Tezza]

Guys,

You might want to try this linklist i put up,
will add to it as i can.

http://rapidshare.com/users/14FDR7

Tezza

[jwwebber]

seems that the highly valuable files are in focus of any notorious eraser, any chance to repost plz.. ?
(maybe megaupload/filefactory/hotfile/depositfiles rather that the unfortunate RS)

[anakuper]

this links will be consider dead links if anyone cant upload it anymore... z:(

[a3990918]

this links will be consider dead links if anyone cant upload it anymore... z:(


If you would have checked before making your post you would have seen that not all the links are dead and are actually still quite active.


Now I had re-uped the Lathe and Shaper plans and was going to re-up the rest over the next week, but if I am going to have to put up with Bull Sh-t like the above post then it will not be worth my time. If anyone wants me to re-up these links then please let me know.


As I said, the lathe & shaper lbooks have been re-uped.

[petersenonmain]

I just started and have not had the chance to get a lot of good stuff and I know that it takes a lot of work to keep up with this info but it's worth it and I am very greatfull. Thank you

[a3990918]

Books #2,3,6 &7 have been re-uped

[a3990918]

.



All LINKS are currently active.


.

[RVM45]

Thanks a lot.

[TASER]

Thank You so much for reposting these files. I wasn't able to get them all before they were pulled last time.

[drbits]

Thank you

[lbq]

thank you

[kourosh2000]

Metalworking Shop from Scrap. The Whole Series. Vol. 1-7 Plus Extras...
Big Collection of Gingery Workshop Books

Below are links to my collection of books from the David and/or Vincent Gingery workshop series. At the end is a list of Gingery books that I am seeking for my collection. Any help in locating them would be "GREATLY" appreciated. Thanks.




Password for all files: a3990918



Metalworking Shop from Scrap:

Gingery 1 The Charcoal Foundry
http://rapidshare.com/files/290902518/Char.Foun.rar
26.9mb

Gingery 2 The Metal Lathe
http://rapidshare.com/files/290481826/lathe.rar (http://rapidshare.com/files/290481826/lathe.rar)
6.19mb

Gingery 3 The Metal Shaper
http://rapidshare.com/files/290481824/Shaper.rar
5.81mb

Gingery 4 The Mill
http://rapidshare.com/files/290913954/The_Milling_Machine.rar
62.3mb

Gingery 5 The Drill Press
http://rapidshare.com/files/290902517/The_Drill_Press.rar
22.8mb

Gingery 6 The Dividing Head
http://rapidshare.com/files/290487117/_Dividing_Head.rar (http://rapidshare.com/files/290487117/_Dividing_Head.rar)
8.04mb

Gingery 7 The Sheet Metal Brake
http://rapidshare.com/files/290487118/Sheet_Metal_Brake.rar (http://rapidshare.com/files/290487118/Sheet_Metal_Brake.rar)
5.56mb

Gingery Coil Winding Machine
http://rapidshare.com/files/290913953/Coil_winding_machine.rar
6.13mb

Plastic Forming:
Gingery Plastic Injection Molding Machine
http://rapidshare.com/files/290922554/_Plastic_Injection_Molding_Machine.rar (http://rapidshare.com/files/290922554/_Plastic_Injection_Molding_Machine.rar)

Gingery Plastic Vacuum Forming Machine
http://rapidshare.com/files/290922555/_Plastic_Vacuum_Forming_Machine.rar (http://rapidshare.com/files/290922555/_Plastic_Vacuum_Forming_Machine.rar)

Metal Casting:
D. Gingery Building a Gas Fired Crucible Furnace
http://rapidshare.com/files/290922551/Building_a_Gas_Fired_Crucible_Furnace.rar (http://rapidshare.com/files/290922551/Building_a_Gas_Fired_Crucible_Furnace.rar)

Gingery Making Crucibles
http://rapidshare.com/files/290922552/Making_Crucibles.rar (http://rapidshare.com/files/290922552/Making_Crucibles.rar)

Non - Gingery Books:
Improved Shop Furnace: Improved version of Gingery's Lil Bertha Elec. Furn
http://rapidshare.com/files/102371234/Elect.rar (http://rapidshare.com/files/102371234/Elect.rar)

An Iron melting Cupala Furnace
http://rapidshare.com/files/102371235/_Cupala.rar (http://rapidshare.com/files/102371235/_Cupala.rar)

Gas Burners for Forges, Furnaces & Kilns: The Bible of Burners
by Michael Porter
http://rapidshare.com/files/103713858/1879535203.rar (http://rapidshare.com/files/103713858/1879535203.rar)


Books I am Looking For:

Looking for the following David Gingery books:


Note that the titles in red represent books that I have acquired since the original posting of this thread. I will be posting these books in the future.


Lil Bertha-Electric Furnace for melting metal
Slip Roll Machine
Design & Build Centrifical Fans
Working Sheetmetal
Sheetmetal Technology
Build a 2-Cyl. Stirling Cycle Engine
Build a 35' Free Standing Tilt-Over Antenna Tower
Gingery's Magneto Magnatizer


Also the following books by Vince Gingery:

Unka Dave Gingery's Shop Notebook
Horz/Vert. Metal Cutting Bandsaw
Power Hacksaw with Vise
Secrets of Building an Alcohol Producing Still
Pipe Bending Machine
Plastic Injection Molding: An Attachment for the Drill Press
Gingery's Atkinson Differential Engine
Gingery's Tesla Turbine
How I Pour Babbitt bearings

and finally this book published by Gingery Publishing:

Building an Atmospheric Forge & Heat Treat Oven


http://i48.photobucket.com/albums/f225/8889653/Posting%20Aids/Enjoy.gif




.

Dear A3190918,

Please upload remained GINGERY books, like magneto magnatizer, Tesla Turbine *& etc.

Thanks!!!:):):)

[The Spyker]

Yes please I would also like to have the Tesla Turbine.

Thanks for all the uploads.

[drbits]

I think A would as well.

[a3990918]

=)

OK guys, the problem is there is a slimey, low life snitch that reports these files to RS as soon as I post them. I have reposted the original files 4 times, not counting the first posting. The file names were encrypted and didn't even contain the name Gingery in them and they were password protected so RS's bruteforce file cracking couldn't open them. It's just too much time to keep re-uping these files when someone is going to have them pulled...:(

To quote Ripsaw from the Saw series of movies,

"I want to play a game"

I'll tell you guys what:

Quid Pro Quo

For every book on my wanted list above, the ones in blue, not the red, that somebody sends me, posts here or shows me a valid download link too, I will repost ( or post if it/they are one of the new ones) 3 books of their choice and will alert them via PM as to when they can download them before I repost the links here.

So please check the torrent lists, Google etc and help me find the books I'm looking for and in return I will try my best to help you out.

Thanks...
a3990918


:)

[drbits]

I feel for you. Even torrents are not going to help much here (I tried).